Metal drills
For both soft and hard metals you can find a metal drill at Stenroc. Find through the drill characteristics below, your perfect drill.
Point angle
![](https://stenroc.com/wp-content/uploads/2018/01/118.png)
The drill has a point angle of 118° for a faster penetration. Appropriate for soft metal.
![](https://stenroc.com/wp-content/uploads/2018/01/135.png)
The drill has a slightly flatter point angle of 135° for good centering when you start to drill. Appropriate for hard metal.
Shank type
![](https://stenroc.com/wp-content/uploads/2018/01/schacht_1.png)
This shank fits every drill head, so the drill head doesn’t need to be changed everytime.
![](https://stenroc.com/wp-content/uploads/2018/01/schacht_2.png)
Perfect when the drill’s diameter is bigger than the drill head.
Cutting point type
![](https://stenroc.com/wp-content/uploads/2018/01/Standaard.png)
A higher pression is needed. Also the centering has to be more accurate.
![](https://stenroc.com/wp-content/uploads/2018/01/Gespleten.png)
For a precise centering and guidance.
Steel characteristics
Heavy-duty high speed steel for drilling holes in easy-to machine materials with a strength of up to 900 N/mm2. Drill is grounded.
Heavy-duty high speed steel for drilling holes in easy-to-machine materials with a strength of up to 900 N/mm2. Drill is grounded.
Heavy-duty high speed steel with 5 % cobalt content. High ductility and heat resistance, for drilling holes in difficult-to-machine materials with a strength of up to 1100 N/mm2. Drill is grounded.
Manufacturing process of the flute
Roll forged
Ground from solid stock
Metal drills
Below you will find an overview of all our metal drills.
Click on a picture and discover all the technical details.
APPLICATIONS OVERVIEW | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
---|---|---|---|---|---|---|---|---|
![]() HSS-G TURBO – DIN 338 |
■■■ | ■■ | ■■■ | ■■ | ■■■ | ■■■ | ■■ | ■ |
![]() HSS PREMIUM – DIN 338 |
■■■ | ■■ | ■ | ■■ | ■■ | ■■ | ■ | |
![]() HSS – DIN 340 |
■■■ | ■■ | ■ | ■■ | ■■ | ■■ | ■ | |
![]() HSS – DIN 338 |
■■ | ■■ | ■ | ■■■ | ■■ | ■ | ||
![]() HSS-Co – DIN 338 |
■■ | ■■ | ■ | ■ | ■ | ■■ | ■■ | ■ |
![]() TiAlN Series |
■■■ | ■■ | ■■■ | ■ | ■■ | ■ | ||
![]() Plating Series |
■■■ | ■■ | ■ | ■■■ | ■■ | ■■ | ■ |
■■■ 1° choice ■■ Recommended ■ Suitable